 |
 |
|
|
|
| Processor/Cache |
|
|
Processors Supported |
Single
or Dual Intel® Pentium® III processors
up to 1 Ghz |
|
| Intel
Chipset |
Intel® 82443GXG
(includes Intel® 21150 AGP-to-PCI Bridge), Intel PIIX4E |
|
| System
Memory |
|
|
Memory Capacity |
Four DIMM sockets
for up to 2 GB of SDRAM (32 MB minimum) |
|
|
Memory Type |
PC/100 133 MHz
SDRAM, 72-bit ECC or 64-bit non-ECC, 168-pin gold plated DIMMs |
|
|
DIMM Sizes |
32 MB, 64 MB,
128 MB, 256 MB, 512 MB |
|
|
Memory Voltage |
3.3V only |
|
|
Error Detection |
Corrects single-bit
errors, detects double-bit errors (using ECC memory) |
|
| Expansion
Slots (all full length) |
|
|
Description |
Two full-length
PCI slots (32-bit/33 MHz) on riser card (not shown) |
|
| Integrated
Adaptec* SCSI Controller |
|
|
Controller |
Adaptec* AIC*-7896
Dual Channel- one Ultra2 (LVD) (up to 80 MB/s) |
|
| Integrated
Intel® Network Adapter |
|
|
Controller |
One Intel®
PRO/100+ Fast Ethernet Server Controller (Intel® 82559) Supports 10BASE-T
and 100BASE-TX, RJ45 output |
|
| Integrated
Graphics |
|
|
Controller |
Controller Cirrus
Logic* GD 5480 |
|
|
Maximum Resolution |
1,280 x 1,024;
16 colors |
|
|
Graphics memory |
2 MB, 10 ns
SGRAM |
|
| Integrated
PCI/ISA IDE Xcelerator (PIIX4e) |
|
|
IDE |
Two independent
channels for a total of four IDE devices. PIO Mode 0, PIO Mode 3, PIO Mode
4, ATA-33 and CD-ROM support. |
|
|
USB |
Two stacked
USB connectors |
|
| Integrated
Super I/O |
|
Controller |
National* Super
87309 |
|
|
Serial ports |
Two Asynch,
RS-232C, 9 pin and 10 pin |
|
|
Parallel port |
IEEE 1284, 25
pin bidirectional |
|
|
Floppy Controller |
1.44 MB |
|
|
Keyboard/mouse |
PS/2, 8240A
compatible |
|
| System
BIOS |
|
|
BIOS Type |
8 MB Flash EEPROM
with Intel® Phoenix* BIOS, Multi-boot BBS (BIOS Boot Specification)
1.0 Compliant |
|
|
Special Features |
Plug and Play,
IDE drive autoconfigure, DMI 2.0, ECC/Parity support, multilingual support
and jumperless processor speed setup |
|
|
Configuration Utilities |
System Set-up
Utility (SSU) enables easy system setup of BIOS and utilities, plug and
play |
|
| Jumpers
and Front Panel Connectors |
|
|
ATX Connectors |
Speaker, reset,
power LEDs, HD LED, power on/off Wake On LAN (WOL) Enable; flash configuration
jumpers include: fault-resilient booting timer, boot-block protection,
boot recovery, CMOS clear, password protect, BMC Forced Update |
|
| Server
Management Instrumentation |
|
|
Failure detection |
Voltage variation,
thermal, operating-system Watchdog Timer, fan failure, power-supply failure,
processor status, ECC memory, heat-sink fan check |
|
|
Emergency Remote Management
Port |
Reset, power
up/down control, read system event log (external modem required) |
|
|
Platform Event Paging |
Paging on 12
configurable events (external modem required) |
|
|
Event Logging |
Nonvolatile
storage to prevent loss of logs in the event of system failure |
|
|
Security |
Video blanking,
password protection |
|
| Intel®
Server Control (ISC) |
|
|
Managed Server |
Operating systems
supported: Windows NT* Server 4.0 SPS Solaris* 7.0 |
|
|
Management Consoles |
ISC integrates
into the leading management supported consoles: Intel® LANDesk®
Server Manager 6.01 HP OpenView* Network Node Manager 5.02 CA TNG* Framework
2.01 for Windows* NT |
|
|
Stand-alone Consoles |
Microsoft Management
Supported Console Internet Explorer* 3.02 and higher Netscape Navigator*
3.0 and higher with ActiveX* snap-in |
|
|
System Health Monitor |
Temperature,
voltage, cooling fans, ECC memory, processor status, power-supply status,
on-board NIC and SCSI. OS hang monitoring via Watchdog Timer |
|
|
Alert Notification |
When a configured
event takes place these methods of notification are available: Network
broadcast, SNMP trap, writing into System Event log (non-volatile storage),
Message box |
|
|
Critical Event Actions |
Graceful operating
system shutdown with reboot or power off at administrator's discretion
Immediate power off, reset or NMI |
|
| Environment |
|
Ambient Temperature |
Operating 10°C
to +35°C Non-operating/storage -40°C to +70°C ambient |
|
|
Relative Humidity |
Non-operating
95% @ 30°C non-condensing |
|
| Regulations |
|
| Safety Regulations |
|
|
U.S. & Canada |
UL1950-CSA 950 |
|
|
|
|
| EMI/RFI |
|
|
U.S. |
FCC, CFR 47
Part 15, Class B |
|
|
|
|
|
|
| System |
|
|
Form Factor |
Rack |
|
|
Height |
2U (3.46") (88mm) |
|
|
Width |
18.90" (480mm) |
|
|
Depth |
24.10" (612mm) |
|
|
Weight |
50 lbs. (minimum
configuration) |
|
| Hot
Swap Drive Bay |
|
|
Drives |
Supports 2x1.6"
and 2x1" or 4x1" SCA 3.5" |
|
|
SCSI Backplane |
SCA Connectors |
|
|
Drive Cooling |
Two fans |
|
| Electrical
Power Supply |
|
|
AC Voltage and Frequency |
115v/60Hz; 230v/50Hz |
|
|
DC Power Supply |
275W |
|
|
+5VDC |
20A maximum
continuous |
|
|
+5V Standby |
2.0A maximum
continuous |
|
|
+12V |
14A maximum
continuous |
|
|
+3.3V |
14A maximum
continuous |
|
|
-5V |
0.2A maximum
continuous |
|
|
-12V |
0.2A maximum
continuous |
|
|
Remote Voltage Sense |
Senses voltage
levels on server board for more precise power-supply voltage regulation,
leading to more efficient use of power |
|
